Print Page - A class "rear fender"

Title: A class "rear fender"
Post by: Truckedup on January 20, 2016, 06:22:08 AM

I'm building an A class naked bike....I don't see anything in the rule book for rear tire coverage like there is for modified production...No fender or seat is required to extend back to the axle center line? Thanks

Title: Re: A class "rear fender"
Post by: fredvance on January 20, 2016, 07:15:53 AM

Real 7.g.10 :roll:

Title: Re: A class "rear fender"
Post by: Truckedup on January 21, 2016, 07:26:39 AM

Quote from: fredvance on January 20, 2016, 07:15:53 AM
Real 7.g.10 :roll:

Yes, it says the fender shall not extend beyond shall not extend 3 inches beyond the tire and a seat is used shall not extend past the tire...Is this to say the seat and or fender MUST extend to these limits? Or can it be shorter?

Title: Re: A class "rear fender"
Post by: Stainless1 on January 21, 2016, 08:01:47 AM

Limits would be the Maximum size... or the maximum length...You can be shorter... this isn't nascar, we don't have templates, build anything within the envelope.
:cheers:

Title: Re: A class "rear fender"
Post by: fredvance on January 21, 2016, 08:58:24 AM

You must have at least two things that are not acceptable in modified production to go to Altered class. The rear fender was one of mine.

Title: Re: A class "rear fender"
Post by: Truckedup on January 21, 2016, 11:23:52 AM

Ok, mine has two engines...and the fender :-D I won't work about any longer, thanks.

Landracing Forum

Bonneville Salt Flats Discussion => SCTA Rule Questions => Topic started by: Truckedup on January 20, 2016, 06:22:08 AM