I think I know that if running a glass windshield I must apply a safety film ?
But what If I am running 3/16" or 1/4" Lexan ? (I assume with Lexan no safety film is needed or required?)
Now when using Lexan,, I will be using the better scratch resistant kind, but it only comes in clear... is it permissible to add a darker window tint to the Lexan to help reduce the glare ?
Thanks
Charles
Why not use a selection of helmet visors instead of tinting your windshield? That way when you're squeezing in the last run of the day you'll still have clear vision.
Pete
Quote from: Peter Jack on June 13, 2010, 09:46:25 AM
Why not use a selection of helmet visors instead of tinting your windshield? That way when you're squeezing in the last run of the day you'll still have clear vision.
Pete
PJ,,, I had though of that too,,,, Part of my twisted thought process was that tinting all the windows and windshield may help reduce the inside temps a few degrees. also...Still working on the driver cooling systems too.
Charles
The rule says "non-laminated" (tempered, explodes into a zillion pieces). Windshields are laminated safety glass. I would use the stock windshield (if it is laminated).
Quote from: thundersalt on June 13, 2010, 10:23:31 AM
The rule says "non-laminated" (tempered, explodes into a zillion pieces). Windshields are laminated safety glass. I would use the stock windshield (if it is laminated).
The stock windshield I have is 57 years old and looks like the edges are blistering and delaminating. Rather than take the chance, I am leaning towards Lexan.
Charles
It's OK to tint your windshield, no matter the material.
Thanks Rich
Charles
Charles, a new glass one is under $300. thru most glass shops. A new rubber is under a hundred. Call me if you have any problems.... Bob (360) 696-1428.
p.s. The only glass you need to cover is the headlights on a 53...........
Charles, If your looking for lexan for the Stude checkout, www.vfnfiberglass.com ...... they make Stude windshield/rear/side windows, including scratch proof lexan (?), different thicknesses and options. Pricing seems reasonable......
Thanks Udo, I sure appreciate it. I will check tomorrow.
Charles