JAP motor.

Started by tauruck, January 10, 2014, 05:07:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tauruck

My mate Hamish rebuilt this motor for one of his bikes.


He brought it to the club to show the guys how it turned out.
I'm sure some of you will appreciate the technology.

tauruck

Other angles.

tauruck

A few more.

makr

Ride fast, safety last.

https://speedofcheeseracing.com/

Peter Jack

It would be neat to see the whole bike when it gets together.  :-D :-D :-D

As an aside, I like the looks of the dark ale beside the engine.  :cheers: :cheers: :cheers:

Pete

Milwaukee Midget

PJ and I are on the same page - I've never had a Namibian lager before.

:cheers:

Oh, yeah . . . the motor . . . Okay, whatthehellizit?
"Problems are almost always a sign of progress."  Harold Bettes
Well, I guess we're making a LOT of progress . . .  :roll:

wobblywalrus

The engine looks right at home in that old pub.  It could run on some of the stuff in the bottles behind the bar.

tauruck

It'a J. A. Prestwich from the late 20s I think.

The dark Ale was actually Rum & Coke and I don't know a thing about beer, any beer!. :-D

The guys at the club are into vintage/classic English cars and bikes.
I don't know anything about them either but MM would probably have a great time with the guys.
There's always lots of beer and the wizards can give part nos on stuff from the 30s and before.

My buddy Guido drags me along every Friday and even though I don't know the subject it's a nice evening.

Koncretekid

From what I've read, all the speedway motors (Jawa, GM, ESO) were based on the original J.A.P. single.
We get too soon oldt, and too late schmart!
Life's uncertain - eat dessert first!

tauruck

Yes, they were.
Check out the bike.

Milwaukee Midget

Quote from: tauruck on January 10, 2014, 08:11:41 PM

I don't know anything about them either but MM would probably have a great time with the guys.
There's always lots of beer and the wizards can give part nos on stuff from the 30s and before.

My buddy Guido drags me along every Friday and even though I don't know the subject it's a nice evening.

Keith Richards once said something to the effect of, "The wise man goes to the party".

Guido is a wise man.

Even if it doesn't apply directly to the build you're doing, perspectives from far flung and older ideas are still of great value.

I have found that I have learned more by cracking a beer with the old guys than I ever learned cracking a book. 

Retention isn't so good . . . but usually by the end of the evening, they start repeating themselves, anyway.  :cheers:

"Problems are almost always a sign of progress."  Harold Bettes
Well, I guess we're making a LOT of progress . . .  :roll:

Peter Jack

Quote from: Milwaukee Midget on January 11, 2014, 08:02:07 AM

Even if it doesn't apply directly to the build you're doing, perspectives from far flung and older ideas are still of great value.

I have found that I have learned more by cracking a beer with the old guys than I ever learned cracking a book. 

Retention isn't so good . . . but usually by the end of the evening, they start repeating themselves, anyway.  :cheers:

I'll have you know I resemble that last remark!  :cheers: :cheers: :cheers:

Pete

Vinsky

#12
Anders Jonsson runs a Esso speedway motor in his LSR bike in the fuel class. I don't recall his record but his plan for this year is to add a hilborn injector instead of the old amal gp.
John

Koncretekid

#13
Quote from: Vinsky on January 12, 2014, 07:09:04 PM
Anders Jonsson runs a Esso speedway motor in his LSR bike in the fuel class. I don't recall his record but his plan for this year is to add a hilborn injector instead of the old amal gp.
Very nice bike.  It looks like it took Jim L. on his Honda water cooled 8 valve twin in 2013 to beat his record. If he comes to BUB, he can get his record back.  I'd love to see it.  Especially since I'll be running 650 APS PG class this year.  The BSA is not much different.
Tom
We get too soon oldt, and too late schmart!
Life's uncertain - eat dessert first!