water to water cooling for an engine

[Hooley]

we have been running an aluminum radiator inside of a welded up box. we pump water from a tank in the passenger seating area. we used a Mazier Remote mounted to move the water through the out side of the radiator. we felt like it worked good. This system hasn't ran a lot of passes to be wore out but the years and hi way miles have caused problems.In preparing for next year we found the engine water was leaking into the remote tank. after  cutting the outside off the radiator,  It has damage that isn't repairable.      Any idea of a radiator that is made for this or one that I could put in a box that can be taken apart easily and cleaned and inspected???

                                   Thanks Hooley

[SPARKY]

I ordered  a 3 pass radiator from AFCO I think. and built a radiator around it

[Mr. Schimstock]

I have a radiator in a box as well.  It is just a welded aluminum box.  It does have a big fill port that can be used to inspect at least one side of the radiator.   I don't see why you could not make the sides of the box removable to allow inspection.

[1leg]

Saldana is great radiator and tank builder. They will make just about anything you want.

https://www.saldanaracingproducts.com/

[Hooley]

Thanks, I have an idea I think might work. and will be removable for inspection and cleaning. Thanks for helping.      Hooley