What would be your next build if time and money permitted?

Started by JasonS, December 06, 2012, 10:19:55 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

JasonS

Ok, I am still at work and I'm EXTREMELY bored, so I thought I would make a thread where everyone can post up their ideal builds! I'll start with one of the many that pop into my head while I'm here.

Today I thought up a Diesel Streamliner using the 700cc diesel engine Arctic Cat puts in their ATVs. As-is the engine would put it in J class, but if it was sleeved down to 500 you could run from K on up :-). I wonder how fast you could get something like that with a suitable turbo?

Ok, everyone else's turn!

Peter Jack

#1
My idea runs along very similar lines using a small industrial diesel. Stock it's naturally aspirated but I think it might be fun to put a turbo on it and add more and more boost until it whimpers. I'd probably start the operation with a pretty serious girdle around it to hold it together for as long as we could. The engine's cheap enough that a guy could start out with two of them, one in the car and one in the trailer. Probably do some work to both to encourage longevity and run until you were out of engines. At that point go home with new found knowledge and see if the next year couldn't be faster using a similar program.

Pete

fredvance

I would probably build a motorcycle streamliner. Try a get a Blue Hat, N/A.
WORLDS FASTEST PRODUCTION MOTORCYCLE 213.470
Vance&Forstall Racing
WOS 2011 235+MPH
Engine by Knecum, Tuned by Johnny Cheese.
Sponsers Catalyst Composites, Johnny Cheese Perf, Knecum Racing Engines, Murray Headers, Carpenter Racing

Captthundarr

Live,Laugh, Love /  Jack Scratch Racing /ECTA   
Amy Hartman-Driver, Frank Hartman-everthing else.
C/GALT 137.65 Ohio Mile check that 144.12 2013, AA/GALT 159.34 Ohio Mile 2014. B/GALT 180.577 RECORD 6/15

JimL


Peter Jack

Quote from: JimL on December 07, 2012, 10:04:26 AM
APS-G-350 bike with four CR85 engines.

You're a glutton for punishment Jim. If two engines are hard to get to run together, what would four be like?  :? :evil: :-D

Pete

Dan Stokes

If I hit the Lotto, maybe a steam powered streamliner.  Those Omega classes look like fun.  It would take two things I don't have - money and skill.  Maybe Jay Leno could lend me his steam mechanic 'cause I know nothin'.

Dan
Wilmington, NC - by the sea

ECTA idiot, Bonneville volunteer

DallasV

Records or parts, I didn't come all this way not to break something.

Glen

Quote from: Dan Stokes on December 07, 2012, 11:07:13 AM
If I hit the Lotto, maybe a steam powered streamliner.  Those Omega classes look like fun.  It would take two things I don't have - money and skill.  Maybe Jay Leno could lend me his steam mechanic 'cause I know nothin'.

Dan

Dan, Poteet & Main are building a new steamliner right now, go for it .
Glen
Crew on Turbinator II

South West, Utah

Glen

Glen
Crew on Turbinator II

South West, Utah

Joe Timney

Joe Timney
Retired President of ECTA
President of Delaware Chassis Works
President of FIREFOX Fire Suppression System
www.delawarechassisworks.com

JasonS

I too would like a couple of steam-powered racers to run Omega. One in a Lakester and one in a bike running APS. I grew up on a farm and a guy down the road has a fully restored steam-engined tractor. Those things are fascinating to watch in action.

generatorshovel

While we are dreaming,,,
How 'bout a 500cc V8 ? blown. and prop-less ?
Tiny
Tiny (in OZ)
I would prefer to make horsepower, rather than buy, or hya it, regardless of the difficulties involved , as it would then be MINE

manta22

Too soon for thinking about a next build-- I have to finish this one first!   :-P

Regards, Neil  Tucson, AZ
Regards, Neil  Tucson, AZ

RacerX9623

For me money is no object . I don't have any.
  My next build will be just like the one I have now with a cleaner riding position. Kinda going to start with a clean sheet. But six seasons of experience.
trying to go 200 KPH with a 250cc four stroke.