Hole Saw inventory liquidation sale (Not SPAM, this is for real).

[Seldom Seen Slim]

I'm wary of using hole saws but'll give 'em another chance. Last autumn I cut a 4" hole through the garage wall so I could route the exhaust from the generator to outdoors, but the danged saw cut the hole about an inch too low - now I've gotta shim the generator to adjust the height.  Buncha extra work - shoulda just used the Husqvarna and a crowbar.

[Jack Gifford]

An inch too low? And you figure that "shimming" the generator will help? ..... Seems to be a pattern here of operator error... :-P

[Seldom Seen Slim]

Geez, youse guys are a rough audience.  Okay - I know that shimming the garage wall would be difficult although it'd probably work to get that hole up to the right altitude.  But if "shimming" means to add a little bit (in this case, of height) -- what's the right word for the unshimming that I really need to do?

And anyway, it doesn't matter 'cause you figured out what I meant, right?

[Buickguy3]

    We have built several Buick straight 8 Cylinder heads using a drill press and hole saws. Requires a bit of patience. That's the go to precision tool in our shop.
  Doug 

[Jack Gifford]

Received my second order promptly. A couple of large size holesaws and a couple of Journeyman's Kits for sons' birthday presents- maybe won't need to loan them holesaws so  often.

Great deal. Thanks!

[salt27]

I've got Don Jackson on the job, he's coming out here in October with his far better half, problem is buying them..... If I can PayPal Steve that would help...I'm just a little wary of paying by CC on unsecured sites.

Got'em    

[BHR301]

Received my order today, very satisfied..good looking saws.

Great deal, thanks Steve!

Bill

[Crazy Canuck]

Tried several times to place an order but the ship to address is in Canada. Because the shipping cost can't be auto calculated, my order gets stalled and can't be completed. Any suggestion on how to get past this barrier? Thanks.

[SteveM]

Tried several times to place an order but the ship to address is in Canada. Because the shipping cost can't be auto calculated, my order gets stalled and can't be completed. Any suggestion on how to get past this barrier? Thanks.

Sorry about the "International Incident".  Best solution is probably to call direct (636)224-0004 and ask for "John L".  He handles all the web orders, but can also take and fill phone orders.

Steve.

[Dr Goggles]

Thanks Steve, these are great. Don (Salt 27) dropped over and gave them to me......I just made a smoker out of and old LPG tank, these were super handy. Great quality, great deal.

[SteveM]

You are quite welcome - and we still have about 10,000 hole saws in stock..... $2 each.

Steve.

[nrhs sales]

I tried to go to the website with the link you provided but it says the website is gone??

[Stainless1]

www.sawbladeexpress.com still there for me....

then go to woodworking for hole saw list

Mine are coping with their tasks....   

[nrhs sales]

I can get to the main page but every time I try to get to the hole saw section it gives me a 404 site not there message.

[RichFox]

Same here