DYNOTHON - 2021 - the Landracing.com Fundraiser. We're BAAAACK!

Started by Milwaukee Midget, June 04, 2021, 08:00:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

fordboy628

Soooo . . . . . .

We did see "flash" peak numbers of 122/123 bhp @ 10,000 rpm, but with the full size pump impellor on the large capacity brake, (hey T&T's normal customers all run BIG Chevys or Nos or blown), we just could not control it well enough to get documentable data points.  We made 3 attempts, and since I was not keen on rebuilding the absorber unit, we just canned any further attempts.    It's going to take at least a smaller diameter impellor on the water pump of the brake unit to have stable control of 60 cubic inches @ 10,000 rpm making 65 ish ft/lbs of tq.  It's a shame but . . . . . the game is for honest, documentable bhp, period.

Vikingboy & Chris have got a good middle range tune into the ECU with the fuel curve and timing both in the "safe" range.   It got "beat up "pretty hard", and can still go into the Midget.   So off the "Bendover" it goes.

The 'K' takes off, right where the tractor engine laid down on the job.   A "continuation", in the truest sense.
Science, NOT Magic . . . .

I used to be a people person.  But people changed that relationship.

"There is nothing permanent except change."    Heraclitus

"Only two things are infinite, the universe and human stupidity, and I'm not sure about the former."     Albert Einstein

Koncretekid

The great white dyno should give you the numbers you want. If the crank, rods, and pistons (and water pump) are capable, with the torque curve continuing to straight-line, the horsepower should just keep increasing and thus the speed. 

Might want to go for the record, make the back-up run, then go for broke!

Any predictions on speed?.

Tom

P.S. How do I make the donation to the forum?
We get too soon oldt, and too late schmart!
Life's uncertain - eat dessert first!

Milwaukee Midget

#47
Quote from: Koncretekid on June 16, 2021, 04:16:37 AM


P.S. How do I make the donation to the forum?

Hey, Tom -

Here you go - and thanks!

http://www.landracing.com/index.php/component/content/article?id=9

I paid up this morning, along with an additional amount my father sent me to tack on. 
He likes this site a great deal.
"Problems are almost always a sign of progress."  Harold Bettes
Well, I guess we're making a LOT of progress . . .  :roll:

Seldom Seen Slim

Let me take a moment right now to thank Chris and Mark and all of you for the funds you're sending to the site.  I've already seen confirmation of 2 or 3 donations today. 

Thank you very much.  Thank you very much!  THANK YOU VERY MUCH!!Thank You Very Much :clap
Jon E. Wennerberg
a/k/a Seldom Seen Slim
Skandia, Michigan
(that's way up north)
2 Club member x2
Owner of landracing.com

WOODY@DDLLC

All models are wrong, but some are useful! G.E. Box (1967) www.designdreams.biz

Queeziryder

Hey Jon,
Money should be on its way through the ether.

Cheers Chris Mark and Jon  :cheers:
Old enough to know better, but too interested in speed to care

floydjer

Taped a check to a mule and pointed him north. Good job Chris. :cheers:
I`d never advocate drugs,alcohol,violence or insanity to anyone...But they work for me.

Lemming Motors

Quote from: Milwaukee Midget on June 15, 2021, 08:06:29 PM


And hopefully a financial help to our favorite site on the web!

What? This web thing has other sites???
A Bonneville Lakester please barman.
Certainly sir; a lick of salt, a sip of gas and a twist of Lemming. More Lemming sir?
Just a squeeze.

A Squeeze of Lemming it is sir.

Stainless1

OK then, 133.33 HP... You can verify my estimate of your actual HP on my dyno whenever you like.... congratulations guys...
$25 =100 + $50 next 25 @$2 +$25 for the last 8.33 @$3.....my $100 headed to Slim
:cheers:  :friday  :cheers:
Stainless
Red Hat 228.039, 2001, 65ci, Bockscar Lakester #1000 with a little N2O

Stan Back

I get lost on the formula, but it's a generous dollar amount.
Past (Only) Member of the San Berdoo Roadsters -- "California's Most-Exclusive Roadster Club"

salt27

I seem to remember something about using PayPal and indicating gift, Is that still the case?

  Don

Seldom Seen Slim

I think it still works like that, but maybe the system has been changed and there's another way to maximise the amount that gets to me.  But - the fee isn't all that usurious and the funds arrive pretty quickly and so on, so I don't lose too much sleep.  I do thank all of youse guys for the support so we can have fun.

Speaking of funds for the site - - wait 'til you hear my idea for the 2021 t-shirt!! :clap muutt
Jon E. Wennerberg
a/k/a Seldom Seen Slim
Skandia, Michigan
(that's way up north)
2 Club member x2
Owner of landracing.com

floydjer

I`d never advocate drugs,alcohol,violence or insanity to anyone...But they work for me.

salt27

Quote from: salt27 on June 17, 2021, 09:39:00 AM
I seem to remember something about using PayPal and indicating gift, Is that still the case?

  Don
Quote from: Seldom Seen Slim on June 17, 2021, 10:56:44 AM
I think it still works like that, but maybe the system has been changed and there's another way to maximise the amount that gets to me.  But - the fee isn't all that usurious and the funds arrive pretty quickly and so on, so I don't lose too much sleep.  I do thank all of youse guys for the support so we can have fun.

Speaking of funds for the site - - wait 'til you hear my idea for the 2021 t-shirt!! :clap muutt


Ether the gift option is defunct or I just couldn't locate it.

Anyway the donation was sent.

And a shout out to Chris and Fordboy for the entertainment.   :cheers:

  Don

Stainless1

Sending to a friend, not a purchase is free as long as if comes from a bank account... If you use a credit card then someone pays the freight...
So mark it as sending to a friend.... it's such a small white lie....  :roll:  :evil:
Just kidding Slim... you are one of my oldest friends... or maybe you just look like one of the oldest....  :cheers:
Stainless
Red Hat 228.039, 2001, 65ci, Bockscar Lakester #1000 with a little N2O