GM 10 Bolt 2.14 Gears

Started by maguromic, April 07, 2012, 03:40:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

maguromic

I have some nice sets of GM 10 bolt gears for sale:

2.14   - $100 
2.29   - $ 75

Shipping anywhere in the continental US $20.  Tony
"If you haven't seen the future, you are not going fast enough"

#31


maguromic

"If you haven't seen the future, you are not going fast enough"

azgearhed

I'm interested in the gear sets, but I'm not sure if they are the ones I want. My 1979 Camaro 10 bolt has a ring gear that has a 8 1/2" major diameter, a 5" inside diameter and a 6.150 bolt circle. This sound like yours?
BC Racing 1979 Z-28
AA/CBGC Record 251.802 Speed Week 2012
AA/CBGALT Record 255.382 Speed Week 2013
AA/CBGC Record 226.104 El Mirage Sept 2015
AA/CBFALT Record 227.954 El Mirage June 2016
AA/CBGC Record 267.878 Speed Week 2018
AA/CBGALT Record 236.458 El Mirage Nov 2016
It's a lot of work to have fun...

Captthundarr

Interested as well mine is 7.625. I was "told" 7.5 would fit. the math don't work.
Live,Laugh, Love /  Jack Scratch Racing /ECTA   
Amy Hartman-Driver, Frank Hartman-everthing else.
C/GALT 137.65 Ohio Mile check that 144.12 2013, AA/GALT 159.34 Ohio Mile 2014. B/GALT 180.577 RECORD 6/15

maguromic

The 2.14 gears are sold, all I have are a few 2.29 sets.  I don' know much about GM diffs but the inside diameter is roughly 4 3/4" ,and I believe as long as you use a 2 series carrier they should work.  I was going to make a custom differential and wasn't worried about the size.  Tony 
"If you haven't seen the future, you are not going fast enough"

Cheep Speed

Are the 2.29's still available ?
Function First....Then Form will follow.

kiwi belly tank

If Tony doesn't have anything, I believe I have a couple of sets of 2.29's. Everybody is in SW mode so you might not get imediate responce.
  Sid.

Cheep Speed

Sid: I got to meet you at Speedweek 2010.  I was the funny tawking guy from New Joisey.  I was with the Daurenheim Bigelow entry #608 then, and you were helpful with input on an ill handling Black E/STR with Ackerman problems. You also helped with some miscellaneous RV-Trailer Hardware for our trailer problems.
I looked at your Liner chassis that you brought out for a pre-inspection.  That project must be about complete by now, No ?
Will you be making it to SW 2013 ?
Since we first met I've acquired Sparky's old car-Ratical. a shakedown run at Loring left me with several mechanical problems preventing my appearance at SW 2012.  I've got a pre-entry for sale #9990.  It's going to be a LONG wait until SW 2013.
Anyway, see if you got an extra set of 2.29's, no big rush, just planning my next moves. Let me know where to send a check.

John O.
Function First....Then Form will follow.

kiwi belly tank

Nah, wasn't me mate! :roll:
Sure I remember ya John. My liner is now AA/BFS & 13 is my plan.
I'll pm you when I get back from SW, heading out today.
  Sid.

maguromic

I have sold all my gears.  Tony
"If you haven't seen the future, you are not going fast enough"

Seldom Seen Slim

Tony, shall I make this thread disappear?
Jon E. Wennerberg
a/k/a Seldom Seen Slim
Skandia, Michigan
(that's way up north)
2 Club member x2
Owner of landracing.com

maguromic

That would be OK. Thanks, Tony
"If you haven't seen the future, you are not going fast enough"