Turnkey LSR Bike For Sale 4 Current Records!

[Tom Liberatore]

For Sale is the "Bonneville Bee", current holder of 4 SCTA/USFRA landspeed records in the 750 Modified Production Pushrod classes. This is a matching numbers 1973 Moto Guzzi V7 Sport that I purchased from its original owner in 2002, completely disassembled and rebuilt to be a Salt Flats Racer. some of the features are: Engine development and head work by Mike Rich Motorsports, dual plugs, 11:7-1 CP pistons, Carrillo rods, PPPC Ti wristpins, Nickasil bores, windage tray, windage plate, Moto Speciale Deep-V sump W/external oil filter, balance by Chris Zootis, Guzzi clutch w/Barnett springs, dyna ignition w/rev limiter set to 9500 rpm, trans gone through by Charley Cole, 2 final drives, tubeless Excell rims by Woody's Wheel Works in Denver, Z rated Michelin tyres, bodywork is all Air-tech with fairing mounts, fuel tank, and bellypan by Evan Wilcox, 3 boxes of spares, Autometer 10,000 rpm tach, and plenty more. With only 10 passes on the motor, there is plenty of speed potential left in the "Bee" but I have MS and can no longer deal with bikes.
$11,500 or possible trade for LSR car or project. Tom [707] 462-0444    I will post some pix in a later post.

[Tom Liberatore]

So far zero luck posting pix, send me a pm and I will try to email some.

[Tom Liberatore]

try again

[PorkPie]

Tom, maybe this helps

[PorkPie]

one more

[Tom Liberatore]

one more

Nice!!! Right when the fun starts!

[Tom Liberatore]

According to Evan Wilcox and the Bonham's auction people, I've overvalued this bike by quite a bit (I think it is priceless) they think it's value is between $8500 and $10K. So anyone that comes up,with a reasonable offer in that neighborhood will get a really fine machine.

[Jack Gifford]

MS? I had no idea.
Someone will be getting a great deal on that Guzzi.
Still hope to meet/chat sometime. I could show you my latest "project"- trying to clean out the barn I've been stashing junk in for 57 years. I'm barely started and have hauled away 5,225 pounds of trash and scrap metal!

[Tom Liberatore]

MS? I had no idea.
Someone will be getting a great deal on that Guzzi.
Still hope to meet/chat sometime. I could show you my latest "project"- trying to clean out the barn I've been stashing junk in for 57 years. I'm barely started and have hauled away 5,225 pounds of trash and scrap metal!

Hey Jack,
I hope some of the junk that you are cleaning out of the barn isn't anything that I left behind! Your Dad was such an awesome guy to let all us kids work on our cars there, that was back in the day when I thought that you could relieve a flathead block with a 1/4" electric drill and a grinding stone. His late forties Ford stakebed with headers and straight pipes made our boy scout paper drives a lot of fun. I will surely look you up the next time that I'm around.

[Tom Liberatore]

Sold to one of those wild Swedish Ice racers!