roll cage requirements

[team damage inc]

hi I'm checking to see if a roll cage from maximum motorsports will pass teck I'm looking at their pn.mmrb-1
pn.mmrb-2  theses are 1-3/4 .134 dom. tubing I'm running lo 150 mph in the real street class one has swing out door bars the other does not I'm leaning more towards the fixed door bars ..  looking forward to racing at LORING this summer again had a total blast last fall
thanks again
                      Wendell Washington   team damage inc.

[Stainless1]

I'm not the Loring expert, but 1 3/4 x .134 DOM properly installed according to the rules will pass 400 MPH tech at Bonneville 
My guess is yes 

[blackslax]

Thanks for reaching out Wendell.
A 6 point roll cage of 1 5/8" x .120 is good to  175mph. 
Please go to www.loringtiming.com and under "how to race" you can  download the rules.
Contacts are listing on  page 1.

All the best,
Tim

[team damage inc]

thanks TIM i have the rule book  just checking  before i buy one  hope all is well looking forward to racing

[bearingburner]

If you ever go over on your head(God Forbid) you don't want to think you should have installed a better roll cage.

[Stainless1]

If you ever go over on your head(God Forbid) you don't want to think you should have installed a better roll cage.

I'll drink to that   

[1leg]

These 6 point kit appear to be just roll bars and not roll cages. I personally would not try to go 150mph in a car without a full Roll Cage...

Give these guys a call, They know alot about building safe land speed cars..
https://www.autopowerindustries.com/