Who’s still in the chute business

[n49racer]

So after a fire hurt both chutes on the car last year I sent them back to Ben at Deist for inspection and repair/replacement. That was over 3 months ago. I try to call every week and get the same story. They haven't been looked at and Ben cannot tell me when as they only have 1 person doing chutes. After reading of the go fund me request for help from Deist I'm getting the sinking feeling that I'm out of luck.

I'm pretty sure non of the other manufacturers will touch anyone's product but their own. SO. It looks like I'm buying 2 new chutes.

Can I get some feedback on chute makers for LSR



Thanks
Ted

[manta22]

I bought my 'chute from Stroud. Talk to Bob Stroud to get his recommendation for your application.

Regards, Neil  Tucson, AZ

[n49racer]

Thanks Neil

Ted

[Stan Back]

I've dealt with Bob Stroud over the years.  He's no nonsense.  He's opinionated.  He knows what he's talking about.  And if it doesn't work exactly like you think it should, he'll fix it.

[SPARKY]

 

[Eddieschopshop]

Looking forward to hearing an answer also.  When I was building the liner I was having trouble getting call backs since I really wanted to talk to someone and have my chutes specifically designed for my application.  After having really bad luck and beginning to run out of time, I finally called Stroud.  Took several calls as Mr. Stroud is not there daily from my understanding, and he is the only one there that sizes Bville chutes.  When I finally got a hold of him, he spent the bulk of our conversation bad mouthing his competition and then promised I would hear from him in a couple of days with recomendations for me.  After a lot of phone calls and never actually talking to him again I gave up on Stroud for chutes.  It worries me that DJ may be in trouble and the last several chutes I have received have only lasted two or three runs each,  all specifically designed for Bville El Mirage for my car.  So I may be in trouble and in need of chutes also.. At El Mirage I shredded both chutes at 292 and had to work hard to get the car stopped. 

[Lemming Motors]

For my communication with DJ to date I have worked with a UK guy who is based at the Santa Pod dragstrip and specialises in extinguishers / fills etc. He is a rep for DJ here and on the advise of this site I got my harnesses very early in the Lakester build  - glad I did as I would have made packaging mistakes without them.  It was from DJ imported by Martin.

My chute was sized by DJ a while back (again packaging plans well in advance of purchase) but when I read a while ago about the crowd funding at DJ I rang Martin in the UK and he assured me that it was an odd situation and a one off - no worries.

I have an open question with him regarding extinguisher cables (push to burst) via DJ and I realise I have heard nothing for weeks.

I too will be interested to hear if there is an alternative or if DJ resolves.

[kiwi belly tank]

How about Autopower in San Diego! I'm not totally up to speed but Rick White, son of Nolan white is still running Autopower as far as I know & they were building chutes. Rick basically grew up on the salt & still runs Nostalgia Top Fuel & I recently saw a #131 blue roadster at B-ville that has to be connected.
  Sid.

[Seldom Seen Slim]

"...I recently saw a #131 blue roadster..."

Nope, in that it's a Comp Coupe, but yep in that it's the White legacy.

[SPARKY]

Stroud is a old guy like the rest of old guys  ---cranky and forgetful --- but I would bet big money you will not hurt one of his chutes as fast as you are wanting to go--I would for sure STOP with BOB  STROUD

[Milwaukee Midget]

While I didn't order a chute, I did order a cage net from Stroud.  I have found that there are those at Stroud other than Bob who know what they're talking about.

The inclination of all of us is to talk to the "old man", but sometimes the service is better handled by the minions.

[kiwi belly tank]

"...I recently saw a #131 blue roadster..."

Nope, in that it's a Comp Coupe, but yep in that it's the White legacy.

Close! Comp coupe is a mod roadster without a haircut.
  Sid.

[Eddieschopshop]

While I didn't order a chute, I did order a cage net from Stroud.  I have found that there are those at Stroud other than Bob who know what they're talking about.

The inclination of all of us is to talk to the "old man", but sometimes the service is better handled by the minions.

I would rather deal with minions being one myself but was told that ONLY Bob could do Bville chutes.  He was supposed to be training someone, maybe that has happened.  Happy with DJ for the most part just frustrated at times

[n49racer]

I received a call from Ben at Deist ( the day after the post🤔) the chutes should be ready next week. Interesting Eddy. The reason I have Deist chutes is exactly the same reason you have them. Anyone else find it odd that there doesn't seem to be SFI info on chutes?  I guess we should be happy as it would probably quadruple the price!!

[SPARKY]

I think Bob likes to talk to the B'ville guys he may be building a Lakester