Introduce Yourself

[Glen]

Contact Rick white at Autopower in San Diego, he should be able to help with the upgrades.

[Sive2x]

 :-DIt's good to be here. Been looking at what I can do about building a stream liner from my variee collection of XS 650 motors, now 750 CC kitted and 90 degree cranks!(very soon ) I iwll be strating on the XSGP 750, the precurser to the XStreamliner in---- a while. First things first, I need more info to start the build.I guess getting a rule book is the first step. Then I will read commnets by all of you then start in when I need some info!

It's great to see that there is an active comunity regausrding the streamliners. I hotught that may be there wasn't this kind of resourse to be albe to cling to during any part of my build up. Just drawings now but when I need to find out about other items then LOOK OUT------ Avallanch time.

Metal fabricater, custom welder, painter, MC mechanic 17+ years = " They call me or I call me 'MR SUDO engineer' = knows just enought o keep from continualy pouring hot water on ones self for extended periods of time"?? Hope that made sence?

I don't build up stuff until I can't get the "NO" answers anymore.

Thanks for being here. It is greatly appreciated. WOW !!!!!!!!!! You guys are really hear

[XSive2X]

 :-DIt's great to see all of you gathered here. I thought there wasn't going to be any one with this type of message board. gald I found you and it's great to be here ..... finally.

Looking to build my own, of couse, but in a few more years as I don't have a clue as to what to do to build the XStreamliner. I never build any thing unitl I can't get the "NO" or the TOO many ? response.


MC mechanic for 17+ years, metal fabricater, custom welding, metal working, and free hand designing.

I refer to my self as a "SUDO-Engineer" = 1 how knows how to keep from pouring hot water over one's body parts on a continuosfaulty endevour. (AWWWW .......no spell check....)

So this is a start of something XSivly Smmple at first glance????K? NOT? Oh well it never hurts to wake up after a short snooze....

Great site guys !!!!!!!!!!!!!

[1212FBGS]

if your into Yam XS motored stuff, you might check out the twin engined blown XS liner i did.... its in the national motorcycle museum.
here is a link
http://www.nationalmcmuseum.org/menu.html

[Glen]

Kent
Are you running the car and bikes at SW this year, welcome back.

[XSive2X]

  Went to your sight and I can't get in. I would really love to see the XSive forses acting upon us !!!!!!!!!!!!!!X

jphaney@reztel.net  John

Just got in...........................I wonder, I ahve 3 motors but they all have different compressions................

I lIke it a lot !!!!!!!!!!!!!!!!!!!!! Do you run it?

[1212FBGS]

nope...... Rick Vesco built it and it almost killed him... i just reatored it....
glen.... yep and yep...love ya too man
kent

[willieworld]

kent was in anomosa in june of 06 went to the museum but dont remember a streamliner  willie buchta

[1212FBGS]

i shipped it to um in nov 07...so i dont think you would have seen it in 06.... ya know, they probably added a few bikes to there collection since you were there in 06 willie i dont think they stopped collecting after you were there

[isiahstites]

Do you guys remember the build thread when Kent rebuilt the liner??

http://www.landracing.com/forum/index.php/topic,3204.0.html

[willieworld]

i was only there the one time it was a great place and i spent one day there from opening until closing  one of my many stops on a short cross country ride 7500 miles in 16 days modesto to new york  wish i would have seen your bike       willie buchta 

[MCR]

Contact Rick white at Autopower in San Diego, he should be able to help with the upgrades.

Yes, I would love to have Autopower do it, but they are too busy in the forseeable future.  I called for an appointment last month, and they said call back this month.  I call this month, and they say call in August.

I'm pretty much getting that from anyone who has done a SCTA rollcage.  Seems most folk do it themselves; the shops that do it for money are all booked.

I've been trying to find a shop to put in the SCTA rollbar for 6 months now with no luck.  So this weekend I fire up the stick welder and start to practice.

[willieworld]

mcr  where are you located   willie buchta

[MCR]

I tried to fill out a profile but it didn't change.

We are in Corona, California.  That is halfway between San Diego and Los Angeles.

[willieworld]

i would  be glad to do a roll cage for you like everyone im booked until after speedweek --my price is 100 dollars per point --the rule book has a pic of a 6 point cage page 25 fig.1 --i would do a 8 point adding 2 diagonal tubed from the back brace to the floor at about a 30 degree angle depending on the car --i live in modesto calif  willie buchta