Roll Bar Question

Started by EastKY, December 17, 2008, 01:32:49 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

EastKY

Is a removable harness bar ok to use on the required 4 point bar for the Super Street class?  135 -149 mph

MIKE MATY

A harness bar will not get you a 150mph tech speed. You will only get 135mph tech speed. Unless you have a vehicle with an integrated roll stucture (ie vette/viper) Then you can get a 150tech with harnesses.
ECTA 200MPH CLUB Maxton
A/FRS      205.531
D/FSS      159.427
ECTA 200MPH CLUB Ohio
A/FRS       208.530
2013 Hot Rod Top Speed Challenge Winner

EastKY

I think there is some confusion...what I am talking about is a 4 point bar being installed with the cross brace behind the drivers head being removeable, bolts in and out to keep the back seat functional.

t russell

Quote from: EastKY on December 17, 2008, 01:32:49 PM
Is a removable harness bar ok to use on the required 4 point bar for the Super Street class?  135 -149 mph
Yes it can be done.I would go for the 6 poiint.
Contact Joe Timney/Keith Turk. On the best way to do it.
terry

EastKY

Do you have any contact information?  I have tryed to email Joe Timney a few times and I don't think the email get's there.

t russell

Joe can be reached @ 302-378-3013. M-F 9-5
terry