Australian Belly Tank

[grumm441]

Thanks Stainless
I think a nice Corvette might be out of my price range
And if it doesn't have three seats, where's Tman going to sit with the beer 
G

[Dr Goggles]

 Got the carcass onto the back of the truck...



You may also notice those short pieces of exhaust....for the last five years they have remained captive in that rear bulkhead. I think it is just because they annoyed the Colonel so much that I was disinclined to change it......today I cut the bulkhead so they can be removed.......now they can be covered in that shiney sh1t while the rest of the frame is to be blasted....a lot of the frame still had mill scale on it so the paint will stick a lot better this time around, as I said earlier I was surprised how little rust there was.



ps: that silver car in the background is where the car that ran into me and broke my leg came from.....I was on the other side of the road traveling away, I ended up on the verge just before that pile of garden clippings after a brief aerobatic display.

[grumm441]

You need to cover all the holes in the diff to limit the garnet ingress
G

[Dr Goggles]

You need to cover all the holes in the diff to limit the garnet ingress
G

why?

Is it abrasive?

[grumm441]

Knobhead

[generatorshovel]

You could use your new tie  (died) dyed moleskins Goggs, to plug the holes 

[ben james]

You need to cover all the holes in the diff to limit the garnet ingress
G

hi Stew,
that nashua gaffer tape would do the trick,
i've used it on some things i've had blasted lately,
best thing you've ever pit me on to.
Benno. 8-)

[Tman]

Thanks Stainless
I think a nice Corvette might be out of my price range
And if it doesn't have three seats, where's Tman going to sit with the beer 
G

Thanks for thinking of me!

Duct tape works well to cover things you dont want blasted.

[grumm441]

It might be a bit late, because , hopefully, Goggs is in his truck on the way to the Blast Factory as I write this
I find Nashua Gaffer the best thin for sandblasting, and i buy my Gaffer Tape from the sandblaster.
He is generally cheaper than the music shops
G

[Milwaukee Midget]

I find Nashua Gaffer the best thin for sandblasting, and i buy my Gaffer Tape from the sandblaster.
He is generally cheaper than the music shops
G

Duct tape works well to cover things you dont want blasted.

Once you've used gaff tape, you'll never want to even look at a roll of duct tape.
Leaves no sticky mess - especially if it sits in the hot sun and the adhesive gets soft.

3-M is about $20.00 a roll here - and worth every penny.

[Dr Goggles]

No, not today, I'll go to the blast factory tomorrow....

Now, we have eveything on this here build diary, cocktail recipes, music suggestions, food prep suggestions and now???laundry tips.

You could use your new tie  (died) dyed moleskins Goggs, to plug the holes 

Last week I had a young bloke drop the bottom end of a CBR250RR at my place for my good friend Tiny ( generatorshovel)...I'm standing next to his car holding the motor which is wrapped in bubblewrap..." do you want to put that down?" he said......... "yeah I guess so" it wasn't very heavy but I took it over to the front door anyway........just as I put it down I noticed that it had been full of oil and there was about a litre of it down my leg( that's 35 fl oz Tortoise)....I was wearing light colored "moleskins"......hmmm.

Soaked them in shellite, covered the oil in Wurth hand cleaner . two scoops of detergent and then 60 degrees.......came out spotless, phew.

Once you've used gaff tape, you'll never want to even look at a roll of duct tape.
Leaves no sticky mess - especially if it sits in the hot sun and the adhesive gets soft.

In the car, couple of weeks back going to a funeral, she's got a black skirt on I pass her the street directory which has the cover stuck together with white gaffa......the adhesive comes off the Gaffa and sticks to the skirt, to say the atmospherewas heavy at that point would be an understatement.............(various items of evidence have been omitted here to protect the innocent) after several non-starters she asks me to get some blu-tac.......dabbing the adhesive it comes off completely,Genius!!!!!!!!!! Pheeeeeeee-eeeeeeew.

[Elmo Rodge]

Ok. I'm mildly curious. How many moles does it take to make a pair of trousers?  Wayno

[Rob]

Ok. I'm mildly curious. How many moles does it take to make a pair of trousers?  Wayno

Just one but she's really good at sewing....

Ok, back under my rock now, couldn't resist.

[Dr Goggles]

Just one but she's really good at sewing....

Ha!

In other news I went top the DLRA AGM yesterday.

There  is very postive work being done around the Lake Omeo dry lake meet.

The Speedweek 2013 date seems to have been agreed upon as the last week of Feb .

Grumm is still head of bike tech....I am something like "Special Construction" representitive.

[grumm441]

In other news I went top the DLRA AGM yeste

...I am something like "Special Construction" representitive.

"Special "

yes
G