3.5-4.0 Complete Indy Car Engines

Started by 9783, March 03, 2011, 05:43:08 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

9783

(1) First Gen Nissan
(5) Second Gen Nissan's



(10) Aurora

These engines are complete from airbox to sump, w/all pumps included. 3500.00 each
We had to buy everything to get the engines we needed for our project and are passing the savings on.
Please contact Jim at jkitasaki@wilsonmanifolds.com for additional information. They are located in Indianapolis, Indiana
SCTA-BNI Gear Grinder / ECTA #9783

9783

SCTA-BNI Gear Grinder / ECTA #9783

9783

#2






SCTA-BNI Gear Grinder / ECTA #9783

desotoman

What years were these motors used at Indy?

You have both Nissan and Aurora motors for sale?

What is the HP of these motors?

Are the wiring harnesses and computers available? What would they cost?

What is the weight of the motors?

Are these core motors that need to be rebuilt or could you run them as is?

Are parts available for these motors, or have they been discontinued?

If you don't want to answer on the forum, you can send me a PM.

Thanks,

Tom G.
I love the USA. How much longer will we be a free nation?

Asking questions is one's only way of getting answers.

The rational person lets verified facts form or modify his opinion.  The ideologue ignores verified facts which don't fit his preconceived opinions.

1212FBGS

Jim
pm me your contact info... i think i just sold 2 for ya
Kent

9783

PM sent.

What we have left...

(1) First Gen Nissan
(1) Second Gen Nissan
(6) Aurora's
SCTA-BNI Gear Grinder / ECTA #9783

joea

amazing..!!!!

seems like "too" good of a deal....

wow...!!!!!

the value here is unreal..!!!!!

Joe :)

Peter Jack

Joe, having spent some time in the Indianapolis area shopping for out of date Indy cars and parts, I can assure you that those sorts of deals are available. I wouldn't worry too much about getting the electronic control systems as the after market stuff available now is probably as good or superior to what those engines used when they were run.

Pete

slimjim

Wow. If I could just wedge one in the GSXR...

9783

#9

What years were these motors used at Indy? 97-2000
You have both Nissan and Aurora motors for sale? Yes

What is the HP of these motors? 650-700

Are the wiring harnesses and computers available? What would they cost? The engine harness is there. No ECM.

What is the weight of the motors? 330 ish

Are these core motors that need to be rebuilt or could you run them as is? They need to be rebuilt.

Are parts available for these motors, or have they been discontinued? They are available.

If you don't want to answer on the forum, you can send me a PM.

Thanks,

Tom G.
SCTA-BNI Gear Grinder / ECTA #9783

Tman

Quote from: Peter Jack on March 05, 2011, 07:27:38 AM
Joe, having spent some time in the Indianapolis area shopping for out of date Indy cars and parts, I can assure you that those sorts of deals are available. I wouldn't worry too much about getting the electronic control systems as the after market stuff available now is probably as good or superior to what those engines used when they were run.

Pete

With much more hiotting the streets  this fall when the current cars are obsolete :wink:

9783

My source at Honda said that's not going to happen.
SCTA-BNI Gear Grinder / ECTA #9783

Tman

Quote from: 9783 on March 05, 2011, 03:33:52 PM
My source at Honda said that's not going to happen.

I meant other than engine stuff.

9783

Quote from: 1212FBGS on March 04, 2011, 02:04:06 PM
Jim
pm me your contact info... i think i just sold 2 for ya
Kent

Thank You
SCTA-BNI Gear Grinder / ECTA #9783

9783

Quote from: joea on March 05, 2011, 05:58:54 AM
amazing..!!!!

seems like "too" good of a deal....

wow...!!!!!

the value here is unreal..!!!!!

Joe :)

I could sell them for 20k each like I've seen elsewhere, but remember...Pig's get fat... Hog's get slaughtered.
SCTA-BNI Gear Grinder / ECTA #9783