SBC 18, 23, SB2 engine components

Started by 9783, March 05, 2011, 02:29:05 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1 2
User actions

9783

March 05, 2011, 02:29:05 AM Last Edit: March 05, 2011, 05:10:26 AM by 9783
18, 23, SB2 engine components. I will have a complete listing next week. From carbs to drysump systems, clutches, AN lines and fittings, new or like new condition on everything. If your looking for a specific component shoot me an email at jkitasaki@wilsonmanifolds.com and we will see if I have what you need. This includes Wilson intakes and spacers. This is stuff I bought in bulk and now selling what we don't need. This is just a small part of what I have.









SCTA-BNI Gear Grinder / ECTA #9783

Seldom Seen Slim

#1
March 05, 2011, 07:05:15 AM
So - what'd you do -- raid Bob Grimble's store after he passed away?  I've never seen such a fine display of "used" racing equipment.

And, with all due respect -- maybe you oughta let me transfer you to the paid "for sale" section of this Forum.  I certainly don't mind when racers try to sell (or buy) stuff -- but when you put up this much and promise more yet -- unh, I'd like to at least chat about having you donate a few bucks to the site in return for the publicity.

And now to those who might suggest I should have made my notice more private -- I mentioned the paid advertising to let everyone know that it's there and available, and also, of course, to try to head off the gentle outrage that has been known to surface when someone is blatantly mis-using the "for sale" part of landracing.com.  No scolding from youse guys, okay?
Jon E. Wennerberg
a/k/a Seldom Seen Slim
Skandia, Michigan
(that's way up north)
2 Club member x2
Owner of landracing.com

9783

#2
March 05, 2011, 07:17:30 AM
Jon I sent you a PM give me a call :)
SCTA-BNI Gear Grinder / ECTA #9783

9783

#3
March 05, 2011, 11:37:55 AM


SCTA-BNI Gear Grinder / ECTA #9783

fastman614

#4
March 05, 2011, 11:49:51 AM
Okay now... .does that tunnel ram go with SB2.2 heads?...

my wish list.... fully assembled SB2.2 heads, pistons, rings, crank, rods, tunnel ram, Holley dominator, valvetrain.... heck...  A WHOLE SB2.2 ENGINE!

just let me in there.... it'd be like being a kid in a candy shop!
No s*** sticks to the man wearing a teflon suit.

9783

#5
March 06, 2011, 04:26:46 AM
Quote from: fastman614 on March 05, 2011, 11:49:51 AM
Okay now... .does that tunnel ram go with SB2.2 heads?...

my wish list.... fully assembled SB2.2 heads, pistons, rings, crank, rods, tunnel ram, Holley dominator, valvetrain.... heck...  A WHOLE SB2.2 ENGINE!

just let me in there.... it'd be like being a kid in a candy shop!

I'll see what is exactly here once I get it sorted out. There are so many crates of stuff I haven't opened yet  :-o
SCTA-BNI Gear Grinder / ECTA #9783

9783

#6
March 08, 2011, 04:57:22 PM Last Edit: March 08, 2011, 05:22:24 PM by 9783
A sample of what we have.




SCTA-BNI Gear Grinder / ECTA #9783

9783

#7
March 08, 2011, 05:30:59 PM Last Edit: March 08, 2011, 05:42:18 PM by 9783




SCTA-BNI Gear Grinder / ECTA #9783

Richard 2

#8
March 08, 2011, 07:01:28 PM
What, No Ford stuff. :cry: :cry: :cry: :cry:
219.648 mph F/BFMR 2010 Record
4 cylinder Esslinger
Could of had a V8

9783

#9
March 08, 2011, 08:25:08 PM
Sorry
SCTA-BNI Gear Grinder / ECTA #9783

Kool Performance

#10
March 24, 2011, 05:30:19 PM
interested in some oil pumps

Steve
812 305 0710

38flattie

#11
March 24, 2011, 05:47:20 PM
sent you a pm a while back, but never heard from you. In addition to the pm, I might be interested in a dry sump
With sufficient thrust, pigs fly just fine. However, this is not necessarily a good idea. It is hard to be sure where they are going to land, and it could be dangerous sitting under them as they fly overhead. -- RFC 1925

You can't make a race horse out of a pig. But if you work hard enough at it you can make a mighty fast pig. - Bob Akin

http://www.flatcadracing.org/
http://youtu.be/89rVb497_4c

3WINDOW

#12
April 19, 2011, 04:54:16 PM
Tell me about the carbs you may have.
I need a 830cfm for a rcr motor.

Do you have any dry sump tanks available?

Look forward to hearing from you

Sean

4-barrel Mike

#13
April 19, 2011, 05:02:24 PM
He hasn't been on landracing.com since March 21.  A PM may get his attention.

Mike
Mike Kelly - PROUD owner of the V4F that powered the #1931 VGC to a 82.803 mph record in 2008!

desotoman

#14
April 19, 2011, 05:52:00 PM
I emailed him a couple of times and never got a reply. I gave up.

Tom G.
I love the USA. How much longer will we be a free nation?

Asking questions is one's only way of getting answers.

The rational person lets verified facts form or modify his opinion.  The ideologue ignores verified facts which don't fit his preconceived opinions.
Print
Go Up Pages1 2
User actions