CAMERAS???????

Started by FADED, April 17, 2011, 07:57:23 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

FADED

I'm wanting to put a camera on my bike this year so I can show the world what it looks like to go a blazin 70 mph!! Does the camera need to be hard mounted or can I run a helmet cam with the suction mount?

lvsalt

 GoPro has alot of mounting options, also HD. Nice unit for the price.
Gary Cole     DCWATERJET Z

FADED

I'm actually looking at the GoPro, My question is will they let me run a "stick-on" helmet cam? I personnally would worry it might fall off 1/2 track? Or are they stuck on good?   

Seldom Seen Slim

Whatever you do, don't ask John Noonan about keeping things with you on the bike. :evil: :-D  (He's the one the supposedly lost his cellphone, from a pocket in his leathers, while going down the long course).
Jon E. Wennerberg
a/k/a Seldom Seen Slim
Skandia, Michigan
(that's way up north)
2 Club member x2
Owner of landracing.com

FADED

YEAH, But his bike "only" goes 250 mph. Thanks again for the leathers Jon!!! YOU DA MAN!!! :cheers:

bvillercr

Gopro wont fall off at 70, they advertise much faster speeds.  I know a few people that desert race with those on their helmet, they can get over those speeds and it's not a smooth ride. :cheers:

FADED

Quote from: bvillercr on April 17, 2011, 10:41:27 AM
Gopro wont fall off at 70, they advertise much faster speeds.  I know a few people that desert race with those on their helmet, they can get over those speeds and it's not a smooth ride. :cheers:

GOOD POINT THANKS!

NArias3

Hey Faded-
Check out this camera: http://replayxd.com/

It's perfect for what you're doing.  The owner of the company is John Spar, of the B&M Racing family.

Nick 3rd.
SCTA Gear Grinder.

https://ariascomponents.com

John Noonan

Quote from: Seldom Seen Slim on April 17, 2011, 08:58:39 AM
Whatever you do, don't ask John Noonan about keeping things with you on the bike. :evil: :-D  (He's the one the supposedly lost his cellphone, from a pocket in his leathers, while going down the long course).

Slim

Never lost the phone, it popped out when the leathers opened up from a bad zipper..got the phone back and it worked great after a 239 mph tumble  :cheers:

GO Pro works great and is easy to mount and use.. :-D

oldracer19

Quote from: John Noonan on April 17, 2011, 06:27:11 PM
Quote from: Seldom Seen Slim on April 17, 2011, 08:58:39 AM
Whatever you do, don't ask John Noonan about keeping things with you on the bike. :evil: :-D  (He's the one the supposedly lost his cellphone, from a pocket in his leathers, while going down the long course).

Slim

Never lost the phone, it popped out when the leathers opened up from a bad zipper..got the phone back and it worked great after a 239 mph tumble  :cheers:

GO Pro works great and is easy to mount and use.. :-D



Just like a racer...blame the equipment!! :-D

"because plan A never works"

V8Pinto

old topic but I'll add my $.02 anyway.  The Go Pro HD has a great suction cup tank mount that stays on well on a faired bike.  I've tested the stick on mounts to 208MPH amd they hold, even out in the wind.  You can safety wire it if you feel the need but you'll do fine at 70mph. 
Shane
V8 Pinto on juice
Hayabusa on the brain
Twin-Turbo F150 4x4

DiveEZ

worked fine at 253 mph
Zane
50's Hybrid, Burns Gasoline and rubber.

www.LandSpeedPhotos.com

Glen

I wouldn,t mount anything on a helmet that could fracture the helmet in a crash. 
Glen
Crew on Turbinator II

South West, Utah

saltracer1

http://www.youtube.com/watch?v=GgWSDugKU0k

this comparison is a year old and things change pretty quickly in the electronics industry.

JustaRacer

Quote from: Glen on December 04, 2012, 07:06:05 PM
I wouldn,t mount anything on a helmet that could fracture the helmet in a crash. 


Typical helmet mounts are either straps or 2-sided tape with a plastic subplate, the mount is not strong enough to affect the helmet body.  Not easy (if even possible) to use one in an SCTA car.

A real problem with the GoPro is that the clevis on the camera cover housing is poorly made.  No root radii, and cheap plastic, and bores are skewed.  They will snap off over time, which has happened to many people so far.  Should run a tether if mounted outside.

Cameras that require HDD's won't work for auto racing.  I lost a lot footage using a cage mounted camera.  The HDD shuts down to protect itself.
My doctor told me to go out and kill people.
Well, sort of.  He told me to reduce the stress in my life.