9" Ford

Started by azgearhed, February 23, 2016, 01:59:01 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

azgearhed

Wanted-9" Ford 2.47 gear set -Tim 602-980-2924
BC Racing 1979 Z-28
AA/CBGC Record 251.802 Speed Week 2012
AA/CBGALT Record 255.382 Speed Week 2013
AA/CBGC Record 226.104 El Mirage Sept 2015
AA/CBFALT Record 227.954 El Mirage June 2016
AA/CBGC Record 267.878 Speed Week 2018
AA/CBGALT Record 236.458 El Mirage Nov 2016
It's a lot of work to have fun...

John Burk

There is a set on ebay .

runt13

i may have one? let me look a friend of mine wanted to build a rat rod and dropped off a bunch of ford stuff a few years back. ill check tonite

RUNT ''13''
who would have guessed it would take so long to go so fast for such a short time?

2012 Wilmington mile
April meet,
p/pp-1350/4 record, 132.601mph

September meet,
p/pp-1350/4 record 139.915mph [bump]
p/pp-1650/4 record 142.364 mph
p/pp-2000/4 record 140.009 mph
p/pp-3000/4 record 144.511 mph

2013 Wilmington mile
July meet,
m/pg-1650/4 record 137.278
m/pg-2000/4 record 136.695

Sept meet,
p/pp-1350/4 record 141.1986 [bump]

2014  Wilmington mile
May meet
p/pp-1340/4 record 142.5855 [bump]

Bob Drury

  If you run across any 73 or 74 Lincoln, Big Ford or Merc sedan or station wagon, they should have one .  Think oil embargo/waiting in gas lines (if you are old like me)
Bob Drury

RichFox

I had a '78 F150 that came with 2:47s

Ron Gibson

Most 77 and 78 Thunderbirds and Cougars with 351/400M engines had 2.47s in them. That oil thing again.

Ron
Life is an abrasive. Whether you get ground away or polished to a shine depends on what you are made of.

runt13

The one that lives behind my shop is out of a 66 or 67 mustang, ratio unknown. However it is complete as in [9'' ford rear with axels and center...no brakes.

being a bike guy, where would the ratio be on the rear!

RUNT ''13''
who would have guessed it would take so long to go so fast for such a short time?

2012 Wilmington mile
April meet,
p/pp-1350/4 record, 132.601mph

September meet,
p/pp-1350/4 record 139.915mph [bump]
p/pp-1650/4 record 142.364 mph
p/pp-2000/4 record 140.009 mph
p/pp-3000/4 record 144.511 mph

2013 Wilmington mile
July meet,
m/pg-1650/4 record 137.278
m/pg-2000/4 record 136.695

Sept meet,
p/pp-1350/4 record 141.1986 [bump]

2014  Wilmington mile
May meet
p/pp-1340/4 record 142.5855 [bump]

Stan Back

Past (Only) Member of the San Berdoo Roadsters -- "California's Most-Exclusive Roadster Club"

bill78

Have you tried Pro Gear in San Diego? 855 571-1158

Bill

RidgeRunner

Runt

     There might be a little metal tag about 1" by 3"  held onto the outside of the center section by one of the nuts along the lower front.  Some had the actual ratio stamped in them, some a letter code. After almost 50 years the odds of it being there, legible, and still applying to whats inside aren't that great.  Only way to know for sure is pull the chunk/pumpkin, count the teeth on the ring and pinion gears, then divide.

                     Ed

     

thundersalt

what do you have for trade? :wink:
916 REMR
2017 AA/FRMR Bonneville Record holder 234.663
2018 AA/GRMR El Mirage Record holder 223.108
2020 AA/BGRMR Bonneville Record holder 252.438
2021 AA/BGRMR Bonneville Record holder 262.685
El Mirage 200 MPH Club
Drivers/Owners: Brian & Celia Dean

ronnieroadster

Working in the shop I use the 'F' word a lot. No not that word these words Focus and Finish go Fast and Flathead Ford!
ECTA  XF/BGRMR Record 179.8561
LTA    XF/BGRMR  Record 200.921 First  Ever Ford Flathead Roadster to hit 200 MPH burning gasoline July 2018
SCTA  XF/BGRMR Record 205.744  First gas burning Ford flathead powered roadster to top 200 MPH at Bonneville August 7, 2021 top speed 219.717
SCTA  XXF/BGRMR Record 216.131 plus a Red Hat
"Life Member of the Bonneville 200 MPH Club"

RansomT

#12
Quote from: runt13 on February 28, 2016, 11:44:54 AM
The one that lives behind my shop is out of a 66 or 67 mustang, ratio unknown. However it is complete as in [9'' ford rear with axels and center...no brakes.

being a bike guy, where would the ratio be on the rear!

RUNT ''13''

(if you turn one drum and they both sides turn together) Turn one drum 360 degrees and see how many times the yoke turns.

(if you turn one drum and the other side pretty much stays put) Turn one drum 720 degrees and see how many times the yoke turns    :-)

geardaddy

I have a couple of 2.47  third members and also some 9 inch 2.50 gears.....612-309-3999.....612-309-3999  I am up VERY late..

salt

I have 2.30 for a 9 inch.
Who Has More Fun?