Sportster/Buell Land Speed Build

Started by 55chevr, October 19, 2008, 04:19:13 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

55chevr

Todd,
I need the front mounts ... Joe

willieworld

im not offering anything----just stating a fact  --no "bone stock" stock motored  buell (2001 and older )will go 159 mph unless you drove it off a cliff or on a dyno or had a 20 mph tail wind----willie buchta
willie-dpombatmir-buchta

narider

Quote from: willieworld on October 28, 2008, 04:58:45 PM
im not offering anything----just stating a fact  --no "bone stock" stock motored  buell (2001 and older )will go 159 mph unless you drove it off a cliff or on a dyno or had a 20 mph tail wind----willie buchta

Glad you weren't there to tell him he couldn't do it before he did it Willie.

I've got early and late ones on hand Joe... (late change was E'84 I believe). Let me know which and I'll get them out,
Todd

willieworld

#48
tod--i would of liked nothing better than to have seen it---i went back and reread all of the posts on this subject---it would be possible to go that fast with a 1200 buell in the right frame in a partial streamline class but a stock buell with a pipe and ignition will not go 159 mph willie buchta
willie-dpombatmir-buchta

narider

Quote from: willieworld on October 28, 2008, 05:11:21 PM
tod--i would of liked nothing better than to have seen it---i went back and reread all of the posts on this subject---it would be possible to go that fast with a 1200 buell in the right frame in a partial streamline class but a stock buell with a pipe and ignition will not go 159 mph willie buchta

Agreed Willie  :cheers:, although in this case it is a bone stock frame as well  :-D

Here's the pic without the fairing.. it did 157 like this:


Here's the faired version, but the bike was in the above config when it was installed and ran 159:

willieworld

#50
sorry to waste your space joe with such dribble my fault --i owe you one  willie buchta
willie-dpombatmir-buchta

55chevr

successful land speed racing requires passion ... both you and Todd certainly have that ... and both are very successful ... Joe

Super Kaz

Quote from: 1212FBGS on October 20, 2008, 12:12:12 AM
ya think.?....

OK I may Not Love You,but you are Pretty Smart :wink:! Got anything Free I can Race :oops:?

55chevr

Scott has all the spare race bikes. I am down to one ready and one in work ... JD

John Noonan

Quote from: Super Kaz on October 29, 2008, 02:12:23 PM


OK I may Not Love You like I love myself ,but you are a Pretty fart smeller :wink:! Got anything Free I can Race :oops:?

Kaz,

I fixed it for you.. :mrgreen:

isiahstites

Quote from: 55chevr on October 29, 2008, 02:24:05 PM
Scott has all the spare race bikes. I am down to one ready and one in work ... JD

My Buell is only getting one more pass this year......the motor needs gone through. I am getting the Busa ready and plan on making 2-3 passes on it at the November meet.

Scott

Super Kaz

Quote from: John Noonan on October 29, 2008, 02:35:58 PM
Quote from: Super Kaz on October 29, 2008, 02:12:23 PM


OK I may Not Love You like I love myself ,but you are a Pretty fart smeller :wink:! Got anything Free I can Race :oops:?

Kaz,

I fixed it for you.. :mrgreen:

Thanks :roll:

John Noonan

Quote from: Super Kaz on October 30, 2008, 09:00:02 AM
Quote from: John Noonan on October 29, 2008, 02:35:58 PM
Quote from: Super Kaz on October 29, 2008, 02:12:23 PM


OK I may Not Love You like I love myself ,but you are a Pretty fart smeller :wink:! Got anything Free I can Race :oops:?

Kaz,

I fixed it for you.. :mrgreen:


Kaz,

The good news is that you now have 6 months to get your bike ready..find any cases yet?

J
Thanks :roll:

Super Kaz

Thank's Worlds Fastest,
NOW IF I CAN JUST KEEP MY NOSE ABOVE WATER TILL THEN :wink:
How does 1 V-rod Racer get a Sponsor since Visa and Master Charge are no longer supporting me :wink:!
Heck I even have a Dream Bike Deal {A PROVEN 250+MPH Machine} I want to buy/trade for my STI,but not sure it will happen. :?
I now need a new set of cases for the V-rod so it will be awhile till it's back together again :cry:!
Anyone know MV Augusta's # or address?
I think I'm gonna have to start sending out Resumes :-o
Kaz.................

55chevr



Intake S1W head



Exhaust S1W head



Chamber S1W head