TREITS STREAMLINER

Started by Freud, July 21, 2009, 12:36:25 PM

Previous topic - Next topic

0 Members and 26 Guests are viewing this topic.

Print
Go Down Pages 1 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 ... 171
User actions

desotoman

#660
April 23, 2011, 10:36:39 PM
Freud,

Do you know that the chocolate eggs that the Easter Bunny leaves goes great with Red Wine. You have a Great Easter Day also.

Tom G.
I love the USA. How much longer will we be a free nation?

Asking questions is one's only way of getting answers.

The rational person lets verified facts form or modify his opinion.  The ideologue ignores verified facts which don't fit his preconceived opinions.

38flattie

#661
April 24, 2011, 07:24:32 AM
Quote from: desotoman on April 23, 2011, 10:36:39 PM
Freud,

Do you know that the chocolate eggs that the Easter Bunny leaves goes great with Red Wine. You have a Great Easter Day also.

Tom G.

So, are you going to change the name to Merlot Treit's Liner? :evil:

Happy Easter Everyone!
With sufficient thrust, pigs fly just fine. However, this is not necessarily a good idea. It is hard to be sure where they are going to land, and it could be dangerous sitting under them as they fly overhead. -- RFC 1925

You can't make a race horse out of a pig. But if you work hard enough at it you can make a mighty fast pig. - Bob Akin

http://www.flatcadracing.org/
http://youtu.be/89rVb497_4c

Rex Schimmer

#662
April 24, 2011, 08:24:15 AM
Freud,
Next time you are at the shop ask Jim what grade of plywood does he use for his bucks? It looks like marine grade, but it sure makes very clean bucks. Just wondering as some day I hope to be doing a buck for what ever I build and I am impressed with the quality of Jim's bucks.

Rex
Rex

Not much matters and the rest doesn't matter at all.

Freud

#663
April 24, 2011, 08:43:34 AM
Flattie......you are disgusting.

What would happen to the nose of the 'liner if we hit it with a full bottle of wine?

We plan to christen it with an incandescent light bulb because we aren't supposed to use them anymore.

That would be our guiding light.

Send the wine to me. I'll make certain it is used for medicinal purposes.

HAPPY EASTER to all of the people that follow this thread. We love you.

FREUD
Since '63

38flattie

#664
April 24, 2011, 08:53:18 AM
 :-D :-D :cheers:
With sufficient thrust, pigs fly just fine. However, this is not necessarily a good idea. It is hard to be sure where they are going to land, and it could be dangerous sitting under them as they fly overhead. -- RFC 1925

You can't make a race horse out of a pig. But if you work hard enough at it you can make a mighty fast pig. - Bob Akin

http://www.flatcadracing.org/
http://youtu.be/89rVb497_4c

WOODY@DDLLC

#665
April 24, 2011, 05:28:03 PM
These folks are in Santa Rosa - I buy it at Bigg's! Put the liner on the label and I am good for a case!  :-D
All models are wrong, but some are useful! G.E. Box (1967) www.designdreams.biz

SPARKY

#666
April 24, 2011, 08:01:18 PM
 :cheers:
Miss LIBERTY,  changing T.K.I.  to noise, dust, rust, BLUE HATS & hopefully not scrap!!

"Security is mostly a superstition. It does not exist in nature, nor do the children of men as a whole experience it. Avoiding danger is no safer in the long run than outright exposure. Life is either a daring adventure or nothing."   Helen Keller

We are going to explore the racing N words NITROUS & NITRO!

Freud

#667
April 24, 2011, 09:53:49 PM
Woody....You are creative, I assure you.

I'll see if we can make a label.

FREUD
Since '63

Freud

#668
April 28, 2011, 03:39:05 PM Last Edit: April 28, 2011, 03:40:43 PM by Freud
Since I will be on the road to Gas Up Friday and Ray Therat will be shooting road racers this weekend our post for this week will

be done early Friday AM.

I won't access have to the url but just go to www.target550.com for the post regarding the enclosures for the tires and wheels.

They were spun from 18 gauge stainless and it even required a special annealing step to allow the outside edges to be formed.

Next week there will be more to show about the rear wheel fairings and the plumbing for the clutch slave cyls.

See u next time and I'll try to post some images from Gas Up both Friday night and Saturday AM. Look under Upcoming Events.

I'll be in Beautiful Buellton and Ray will be in snowy Salt Lake.

FREUD
Since '63

Freud

#669
April 28, 2011, 10:41:51 PM
I lied. Ray didn't take a nap. He did the post.

http://www.target550.com/gallery/108_tire_&_wheel_enclosures/index.html

That will lead you to this weeks post.

More wheel fairings and clutch slaves next week.

FREUD
Since '63

Freud

#670
April 29, 2011, 08:02:45 AM
Just so everyone knows, take a look at www.target550.com for the latest post.

FREUD
Since '63

sabat

#671
April 30, 2011, 05:42:48 AM
Great pictures and documentation as always, thank you.  :cheers:

Freud

#672
May 05, 2011, 08:15:32 AM Last Edit: May 05, 2011, 08:17:07 AM by Freud
It seems to me that we will be making a post Friday.

I'm just about recovered from the Gas Up trip.

The post will involve the plumbing for the clutch slaves.

FREUD
Since '63

Dean Los Angeles

#673
May 05, 2011, 11:27:24 AM
QuoteThe post will involve the plumbing for the clutch slaves.

Ooooh, the clutch slaves. Will it also involve whips and chains?
Well, it used to be Los Angeles . . . 50 miles north of Fresno now.
Just remember . . . It isn't life or death.
It's bigger than life or death! It's RACING.

Freud

#674
May 05, 2011, 11:41:15 AM
No, but it will include nuts and nipples.

I hope we can keep your attention.

FREUD
Since '63
Print
Go Up Pages 1 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 ... 171
User actions