XXO/BVGC '38 Chevy Coupe Build

Started by 38flattie, July 21, 2010, 06:34:16 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

38flattie

Thanks everyone! It was great meeting new faces, and seeing old ones! I just wish I was better at remembering names. Due to thrashing, I apologize for not having more time to concentrate on our chats.

I agree, early morning impound is an awesome thing! I wish everyone could experience it once, and sure hope we can return there in the future.

Quote from: GH on August 21, 2013, 12:32:46 PM
Buddy, you and Randy sure blew Mike Collisons  old record away that he set in the 1950 Buick. He had lost his other records to the Salt Cat Team.

Gary, I wouldn't say we blew it away, as we only raised it 14 mph. We had an initial qualifying run on it at 167.5, but melted the rotor.

Those Salt Cat guys are tough, so it's not surprising they took the rest of Mike's records. I understand they are dusting off the Jag for a return next year, so we're looking forward to them pushing us very hard!

The Salt Car records are hard to qualify on in the short course, so we'll try to run out to the 4 mile next year, and see what happens.
With sufficient thrust, pigs fly just fine. However, this is not necessarily a good idea. It is hard to be sure where they are going to land, and it could be dangerous sitting under them as they fly overhead. -- RFC 1925

You can't make a race horse out of a pig. But if you work hard enough at it you can make a mighty fast pig. - Bob Akin

http://www.flatcadracing.org/
http://youtu.be/89rVb497_4c

38flattie

Well, I've decided that the open trailer, and whole 'Beverly Hilltbilly" look has to go!

We seem to acquire more stuff for the car all the time, and now that we have 2 front ends, extra sheet metal, etc. I've decided an enclosed trailer would be nice. The wife agrees, as it would allow me to collect some of the parts that are now in Ohio and MO.

So, that's the quest I'm on now! :-D
With sufficient thrust, pigs fly just fine. However, this is not necessarily a good idea. It is hard to be sure where they are going to land, and it could be dangerous sitting under them as they fly overhead. -- RFC 1925

You can't make a race horse out of a pig. But if you work hard enough at it you can make a mighty fast pig. - Bob Akin

http://www.flatcadracing.org/
http://youtu.be/89rVb497_4c

Sumner

Buddy good meeting you on the salt and congrats on all you did with the car and yes John is a hell of a fiberglasser.  As you know after seeing last year's speeds and HP I thought 200 might be out of reach but you are making a believer out of me with the 189 run that it could happen.  Glad to hear you are going to give it another go,

Sumner

Pete1

Quote from: 38flattie on August 23, 2013, 08:53:14 AM
Well, I've decided that the open trailer, and whole 'Beverly Hilltbilly" look has to go!

We seem to acquire more stuff for the car all the time, and now that we have 2 front ends, extra sheet metal, etc. I've decided an enclosed trailer would be nice. The wife agrees, as it would allow me to collect some of the parts that are now in Ohio and MO.

So, that's the quest I'm on now! :-D


Forget the trailer. Go directly to a two story 18 wheeler. You will eventually anyway.
You can get a good used one from the sprint car guys.

38flattie

Sum, it was great meeting you also!

That car looks killer, and it looked like you were enjoying yourself on the licensing runs!
With sufficient thrust, pigs fly just fine. However, this is not necessarily a good idea. It is hard to be sure where they are going to land, and it could be dangerous sitting under them as they fly overhead. -- RFC 1925

You can't make a race horse out of a pig. But if you work hard enough at it you can make a mighty fast pig. - Bob Akin

http://www.flatcadracing.org/
http://youtu.be/89rVb497_4c

38flattie

Trent, this pic is for you! My cutoff shirts have become somewhat infamous, with both you and my team mates commenting on them.

Also, if you remember, last year my rig crews all sported mohawks, and gave me one.

Danny and I had run to town to get parts, and this is what we returned too!

With sufficient thrust, pigs fly just fine. However, this is not necessarily a good idea. It is hard to be sure where they are going to land, and it could be dangerous sitting under them as they fly overhead. -- RFC 1925

You can't make a race horse out of a pig. But if you work hard enough at it you can make a mighty fast pig. - Bob Akin

http://www.flatcadracing.org/
http://youtu.be/89rVb497_4c

38flattie

#1986
At Speedweek, we were the first car down course 3. These videos show that run, with Dale driving in XXO/BFALT class. This run averaged 167.5 mph, with an exit speed of 168 mph. The first video is from inside the car, the second from outside.

http://youtu.be/FrNT56O8mdQ

http://youtu.be/MQDu7FKpSAg
With sufficient thrust, pigs fly just fine. However, this is not necessarily a good idea. It is hard to be sure where they are going to land, and it could be dangerous sitting under them as they fly overhead. -- RFC 1925

You can't make a race horse out of a pig. But if you work hard enough at it you can make a mighty fast pig. - Bob Akin

http://www.flatcadracing.org/
http://youtu.be/89rVb497_4c

lsrjunkie

Great video Buddy! A little salt first thing in the morning is a pretty good way to start your day!
Maybe there is no Heaven. Or maybe this is all pure gibberish. The product of a demented hill billy who has found a way to live out where the winds blow. To sleep late, have fun, drink whiskey, and drive fast on empty streets with nothing in mind except falling in love or getting arrested.    H.S. Thompson

Stainless1

Nice run Dale...  :-D that is what LSR is about.  Looked like you were close to the max at that power/aero combo.
Stainless
Red Hat 228.039, 2001, 65ci, Bockscar Lakester #1000 with a little N2O

Tman

Quote from: 38flattie on August 25, 2013, 11:19:00 AM
Trent, this pic is for you! My cutoff shirts have become somewhat infamous, with both you and my team mates commenting on them.

Also, if you remember, last year my rig crews all sported mohawks, and gave me one.

Danny and I had run to town to get parts, and this is what we returned too!



We watched them getting ready, funny schtuff!

desotoman

Dale,

I liked the way you throttled the car in the video.  :cheers:

Tom G.
I love the USA. How much longer will we be a free nation?

Asking questions is one's only way of getting answers.

The rational person lets verified facts form or modify his opinion.  The ideologue ignores verified facts which don't fit his preconceived opinions.

manta22

Nice video. Good straight run; I don't think the driver's hands moved more than one inch on the steering wheel.

Regards, Neil  Tucson, AZ
Regards, Neil  Tucson, AZ

Stan Back

Great videos!

Could save a fell lots of $$$ by just watching those two on a big screen.  No getting ripped off for rooms, no long lines, no sunburn (no glory, either).
Past (Only) Member of the San Berdoo Roadsters -- "California's Most-Exclusive Roadster Club"

ronnieroadster

 Thanks for the ride really enjoyed it.  If I ever get my car to the salt watching the two videos will help greatly.     :cheers:
Ronnieroadster
Working in the shop I use the 'F' word a lot. No not that word these words Focus and Finish go Fast and Flathead Ford!
ECTA  XF/BGRMR Record 179.8561
LTA    XF/BGRMR  Record 200.921 First  Ever Ford Flathead Roadster to hit 200 MPH burning gasoline July 2018
SCTA  XF/BGRMR Record 205.744  First gas burning Ford flathead powered roadster to top 200 MPH at Bonneville August 7, 2021 top speed 219.717
SCTA  XXF/BGRMR Record 216.131 plus a Red Hat
"Life Member of the Bonneville 200 MPH Club"

Pete1