XXO/BVGC '38 Chevy Coupe Build

[Milwaukee Midget]

You guys talk like a bunch of dimwits...You build them to race, not to idle around and save it for next year.
If you build them right they don't blow.

Pete, please.  

Read through this diary.

They have built this engine right.

The nature of this engine build is so out-of-the-ordinary, so extreme, and takes into account so many anomalies unique to the basic design that Buddy and the guys are completely into uncharted territory.

They are right at the edge with this one - NOBODY has pushed a Caddy Flat-head this far.

And because there is no precedent, there is the possibility of failure.

Fordboy and I had the pleasure of sharing dinner with Buddy last week.  Buddy is keenly aware of the potential for failure with this set-up.  Having watched this build from day one, I can tell you that if it should fail, it will have nothing to do with failing to build the engine right.  

I find your comment offensive - or at least, ill-informed.

[38flattie]

Chris, thanks for the kind words, but there is no need for anyone to be too offended.LOL!  Pete's really a good guy, although rough in his verbal delivery sometimes!

Pete ran at B'ville in the early fifties, and went with us in 2011. In fact, it was Pete's SBC that we used that year to shake the car down with.

Pete builds some elephant Ford flatheads-real monsters, and well, you can see he's pretty opinioned! Lol!

[Pete1]

You guys talk like a bunch of dimwits...You build them to race, not to idle around and save it for next year.
If you build them right they don't blow.

Pete, please.  

Read through this diary.

They have built this engine right.

The nature of this engine build is so out-of-the-ordinary, so extreme, and takes into account so many anomalies unique to the basic design that Buddy and the guys are completely into uncharted territory.

They are right at the edge with this one - NOBODY has pushed a Caddy Flat-head this far.

And because there is no precedent, there is the possibility of failure.

Fordboy and I had the pleasure of sharing dinner with Buddy last week.  Buddy is keenly aware of the potential for failure with this set-up.  Having watched this build from day one, I can tell you that if it should fail, it will have nothing to do with failing to build the engine right.  

I find your comment offensive - or at least, ill-informed.

WHO is ill informed??
I have been part of this whole thing from the beginning...REMEMBER, WE RAN MY ENGINE THE FIRST YEAR.
So far as I recall the flat cad has only gone .3 mph faster than my stock unblown SBC crate engine at Bonneville..
I wasn't trying to be a smart ass, I was just telling it like it is...That flat cad is NOT going to blow even with pop in it.

[Milwaukee Midget]

Pete, you have my apology.  It looked like an impending donnybrook, and I love those.

I didn't know the history - which means it's probably time for ME to re-read this build dairy!  :|

Stop by during Speedweek - I owe you a beer . . .

My grandmother had a refrigerator magnet that read -

"Lord, let my words today be sweet and tender -

Because tomorrow, I may have to eat them."

[Stan Back]

Pete --

You ran almost as fast as the Cad, right?

But didn't you go all the way to the 4 or 5 or

[38flattie]

Pete, we ran 13 MPH faster than the SBC with the flatcad top end-166MPH. The record was .3 MPH faster than top speed with the SBC, because that record was set between the 1-2 miles.

[Pete1]

Pete --

You ran almost as fast as the Cad, right?

But didn't you go all the way to the 4 or 5 or

I went past the turn out road once because the chute didn't open and between fiddling with that and pumping the brake pedal which there was NO brakes till I pumped about 15 times, yea, I went a bit too far once.
And besides all that, I broke a bone chip off my knee with the shift lever because there wasn't enough clearance for a knee between the roll cage brace and the lever.

[Pete1]

Pete, we ran 13 MPH faster than the SBC with the flatcad top end-166MPH. The record was .3 MPH faster than top speed with the SBC, because that record was set between the 1-2 miles.

I know all that...I was just poking you with the needle. LOL

[Pete1]

Pete, you have my apology.  It looked like an impending donnybrook, and I love those.

I didn't know the history - which means it's probably time for ME to re-read this build dairy!  :|

Stop by during Speedweek - I owe you a beer . . .

My grandmother had a refrigerator magnet that read -

"Lord, let my words today be sweet and tender -

Because tomorrow, I may have to eat them."

No apology necessary and I'll drink beer with you any time only it's on me...

[Tman]

Pete/Buddy, we miss you in the Tuesday chats

[Frankie7799]

Pete definitely comes across as a salty old racer, nothing wrong with that. Have met many of them over the years. 

[Pete1]

Pete/Buddy, we miss you in the Tuesday chats

I look in several times a week but I guess everyone's on a strict schedule and can't get there any other time.
We need to train people to leave a chat window open all the time and make it about an inch square down in the corner of their screen. Then they  can see if anyones on any time they are at the computer.

[Tman]

Pete/Buddy, we miss you in the Tuesday chats

I look in several times a week but I guess everyone's on a strict schedule and can't get there any other time.
We need to train people to leave a chat window open all the time and make it about an inch square down in the corner of their screen. Then they  can see if anyones on any time they are at the computer.

The main activity is the 7-8PM MTN Window on Tuesday nights. Our club chats were open each night and it got to the point where no one showed up so we went back to a scheduled time.

[Pete1]

Pete/Buddy, we miss you in the Tuesday chats

I look in several times a week but I guess everyone's on a strict schedule and can't get there any other time.
We need to train people to leave a chat window open all the time and make it about an inch square down in the corner of their screen. Then they  can see if anyones on any time they are at the computer.

The main activity is the 7-8PM MTN Window on Tuesday nights. Our club chats were open each night and it got to the point where no one showed up so we went back to a scheduled time.

Yup, I can understand that. Most car people only want to talk about one subject and there is only so much to say.
I have found over the years and moderating a few chat rooms that some people just don't talk much. Others would like to talk a lot but lack the typing skill to keep up. Usually the ones that can carry the room can (and will) talk on any subject that the group may get side tracked on. One vintage car forum I go to gets talking on hunting, photography, planes and many other subjects quite often. It's like real life, people will migrate to the forum they are comfortable with.

[jl222]

Buddy,
I think aero is going to achieve a lot more than you think.  I would be cautious with the increase in HP until you see how much you gain with the body changes.  There's always next year -- if you don't blow the motor.
Tom

You guys talk like a bunch of dimwits...You build them to race, not to idle around and save it for next year.
If you build them right they don't blow.

  Your superior knowledge is greatly needed for all those ''dimwits'' in Top Fuel

             JL222