MS LIBERTY a Wild Weasel's belly tank

Started by SPARKY, March 13, 2011, 03:11:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

SPARKY

#375
Rob some times it feels like 3 forward and 2 back  but we try to keep after it and get something done each week.

We had out of town drop by-- Francis. Andy came over and later Marty dropped off the almost completed "radiator in a box" done today and I showed him the new welder and Plasma cutter. We also discussed some options on the heating coil we will put in the dry sump tank.

2-22-12  you can see the weld in the tank where they inserted the blocking tab that makes it into a 2 pass.
Miss LIBERTY,  changing T.K.I.  to noise, dust, rust, BLUE HATS & hopefully not scrap!!

"Security is mostly a superstition. It does not exist in nature, nor do the children of men as a whole experience it. Avoiding danger is no safer in the long run than outright exposure. Life is either a daring adventure or nothing."   Helen Keller

We are going to explore the racing N words NITROUS & NITRO!

SPARKY

Well---the lesson of the day is----ta da--- Most of the race stuff has 5/16 dia. rods on their master cyls and most of the street rod stuff has 3/8  so I now need to make or find me a 5/16" female to 3/8" male adapter to make the brakes work.
Miss LIBERTY,  changing T.K.I.  to noise, dust, rust, BLUE HATS & hopefully not scrap!!

"Security is mostly a superstition. It does not exist in nature, nor do the children of men as a whole experience it. Avoiding danger is no safer in the long run than outright exposure. Life is either a daring adventure or nothing."   Helen Keller

We are going to explore the racing N words NITROUS & NITRO!

robfrey

Rex, do you have any renderings of the Thud Spud with the wild weasel nose? It would be good to look at the both with renderings from the sane angle.
496 BGS
carbinitelsr.com
carbiniteracing.com
carbinite.com

Tman

Thanks for those pictures, looks like you have a rad mounted between two boxes?

Dr Goggles

Quote from: robfrey on February 20, 2012, 08:08:14 PM
Rex, do you have any renderings of the Thud Spud with the wild weasel nose? It would be good to look at the both with renderings from the sane angle.

pretty sure that angle is not available. :cheers:
Few understand what I'm trying to do but they vastly outnumber those who understand why...................

http://thespiritofsunshine.blogspot.com/

Current Australian E/GL record holder at 215.041mph

THE LUCKIEST MAN IN SLOW BUSINESS.

robfrey

Lol! I meant same angle! We all have come I the conclusion that there is no sanity here on this forum.
496 BGS
carbinitelsr.com
carbiniteracing.com
carbinite.com

SPARKY

#381
T-man  It is a 2 pass radiator in a box with an internal baffle, that makes the water cross through, go up, then back through before exiting.  We haven't installed the bungs yet for the cooling water in, the heated water out or the pump out bung for taking the water out for warming up the eng. 

We will also have a heated water line from under the thermostat to go through the dry sump tank to heat the oil and then back to the intake side of the water pump.  We may or may not run a second thermostat in that line to close it off when its up to temp.
Miss LIBERTY,  changing T.K.I.  to noise, dust, rust, BLUE HATS & hopefully not scrap!!

"Security is mostly a superstition. It does not exist in nature, nor do the children of men as a whole experience it. Avoiding danger is no safer in the long run than outright exposure. Life is either a daring adventure or nothing."   Helen Keller

We are going to explore the racing N words NITROUS & NITRO!

SPARKY

ok, is this what you were wanting to see?
Miss LIBERTY,  changing T.K.I.  to noise, dust, rust, BLUE HATS & hopefully not scrap!!

"Security is mostly a superstition. It does not exist in nature, nor do the children of men as a whole experience it. Avoiding danger is no safer in the long run than outright exposure. Life is either a daring adventure or nothing."   Helen Keller

We are going to explore the racing N words NITROUS & NITRO!

Rex Schimmer

Woody,
Is the red spot just in front of the rear tires where the salt is going to stick to the body??

Rex
Rex

Not much matters and the rest doesn't matter at all.

38flattie

Quote from: Rex Schimmer on February 22, 2012, 10:21:04 AM
Woody,
Is the red spot just in front of the rear tires where the salt is going to stick to the body??

Rex

:-D :-D :-D
With sufficient thrust, pigs fly just fine. However, this is not necessarily a good idea. It is hard to be sure where they are going to land, and it could be dangerous sitting under them as they fly overhead. -- RFC 1925

You can't make a race horse out of a pig. But if you work hard enough at it you can make a mighty fast pig. - Bob Akin

http://www.flatcadracing.org/
http://youtu.be/89rVb497_4c

Stan Back

Sparky let me know, confidentially, that he's planning a water misting in that area.  He figures by the two, the salt build-up will streamline the back wheels and add 10 MPH.  He'll kick it off on the way to Impound.
Past (Only) Member of the San Berdoo Roadsters -- "California's Most-Exclusive Roadster Club"

SPARKY

#386
Teflon "Salt no Stickem"
Miss LIBERTY,  changing T.K.I.  to noise, dust, rust, BLUE HATS & hopefully not scrap!!

"Security is mostly a superstition. It does not exist in nature, nor do the children of men as a whole experience it. Avoiding danger is no safer in the long run than outright exposure. Life is either a daring adventure or nothing."   Helen Keller

We are going to explore the racing N words NITROUS & NITRO!

4-barrel Mike

Whitewalls?   Cool!   :cheers:

Mike
Mike Kelly - PROUD owner of the V4F that powered the #1931 VGC to a 82.803 mph record in 2008!

theazoldcrow

 :-D  If the white walls are waxed with carnuba it is possible to reduce air drag by an undocumented amount!  (some old codger told me this my first trip to the Salt)
The Earth, is an intergalactic insane asylum.!

rd400f

Quote from: SPARKY on February 21, 2012, 08:57:59 PM
ok, is this what you were wanting to see?

Hi
What software are you using to do your sim's?
Flow Simulation from Solidworks ?
Thanks
Richard